Align spine and pocket labels
Use the Printer offsets to fine-tune the alignment of the printing on the labels.
The Horizontal and Vertical offsets let you adjust the left and top margins, respectively. Each increment is equal to 1/10th of a millimeter. When you print, Destiny® saves the offset settings you used so that you do not have to set them again. Keep in mind that the offsets needed for each label stock vary from printer to printer. Any offsets you define for labels are in addition to the unprintable area defined in your printer's properties.
The first time you select a label stock, print a few tests on plain paper to ensure that the printing is aligned correctly.
For the Horizontal setting, locate your stock in the following table and enter a number within the allowable range:
| Item # | Minimum Setting | Maximum Setting |
|---|---|---|
| Spine Labels | ||
| Demco 14216170 | -34 | 34 |
| Demco 14216190 | -36 | 36 |
| Demco 14218020 | -18 | 18 |
| Demco 14218030 | -18 | 18 |
| Sagebrush 0370-00000009 | -36 | 36 |
| University 9-62450-12 | -16 | 16 |
| Spine/Pocket Labels | ||
| Demco 14216180 | -68 | 67 |
| Demco 14216850 | -18 | 18 |
| University 342-SL4L | -16 | 22 |
| University 342-OS6DL | -22 | 22 |
| University 9-62450-15 | -48 | 64 |
For the Vertical setting:
| Item # | Minimum Setting | Maximum Setting |
|---|---|---|
| Spine Labels | ||
| Demco 14216170 | -34 | 34 |
| Demco 14216190 | -36 | 36 |
| Demco 14218020 | -18 | 18 |
| Demco 14218030 | -36 | 36 |
| Sagebrush 370-00000009 | -13 | 13 |
| University 9-62450-12 | -36 | 36 |
| Spine/Pocket Labels | ||
| Demco 14216180 | -18 | 18 |
| Demco 14216850 | -36 | 36 |
| University 342-SL4L | -40 | 37 |
| University 342-OS6DL | -50 | 50 |
| University 9-62450-15 | -36 | 36 |